Dulux Trade Ultra Matt Interior Walls - 5 Litre - Tinted Colour Match
Dulux Trade Ultra Matt Interior Walls - 5 Litre - Tinted Colour Match
Overview
Dulux Trade Ultra Matt Interior Walls is a water-based paint that delivers a beautifully smooth, non-reflective dead flat matt finish with an ultra-low sheen of just 1–2%.
Designed for interior walls, it offers excellent opacity, outstanding coverage and Class 1 durability for long-lasting results. Its superior touch-up properties make repairs near invisible, while the washable, wipeable finish is ideal for busy spaces.
Available in a wide range of Dulux colours as well as RAL, British Standard and NSC, it is also 99.9% VOC free, helping to maintain healthier indoor air quality.
- Dead flat matt finish - 1–2% ultra-low sheen
- Excellent opacity and coverage
- Outstanding touch-up properties for seamless repairs
- Washable, wipeable and Class 1 durable finish
- Water-based - 99.9% VOC free
- Tintable in a wide range of colours
Tinted Colour Information
Tinted paint is custom mixed in house at Next Day Paint using our Dulux tinting machine. We mix the paint on site, which means we can offer our usual fast delivery with no extra delay. Tinted Colour Match paints can't be cancelled or returned as they are tinted to order.| Area | Interior |
| Recommended Use |
All normal interior wall and ceiling surfaces. For interior areas that are likely to suffer from mould growth, use Dulux Trade Mouldshield Fungicidal Eggshell or Dulux Trade Durable Kitchen and Bathroom Eggshell |
| Base | Water-Based |
| Coverage | Up to 17m2 per litre |
| Drying Time | Dependent on temperature and humidity. |
| Re-Coat Time | 2-4 Hours |
| Recommended Coats | 2 Coats |
| Application Method | Brush, Roller, Airless Spray |
| VOC Levels | Minimal |
| Clean Up | Remove as much product as possible from the equipment before cleaning with water |
Preparation
For best results, ensure surfaces to be painted are sound, clean, dry. It is particularly important that new surfaces are completely dry before you start painting.
- Remove all loose and defective paint. Special precautions should be taken during surface preparation of pre-1960s paint surfaces over wood and metal as they may contain harmful lead.
- Where necessary, wash the surface, rinse with clean water and allow to dry.
- Seal surfaces that remain powdery after thorough preparation with an appropriate plaster sealer.
- Where necessary, rub down and then wipe off with a damp, lint free cloth to avoid dust.
- Fill any gaps with an appropriate filler such as Polycell Trade Polyfilla.
For detailed preparation and application recommendations, please refer to the product Technical Datasheet before application.
Application
Always test a small area of the surface to be painted to ensure you are happy with the finished results.
- Ensure the paint is thoroughly stirred prior to application.
- On new or bare surfaces, apply a sealing coat thinned with up to 1 part clean water to 5 parts paint.
- Apply by brush, roller or airless spray. For most projects, apply 2 full coats for a durable, even finish, although additional coats may be needed when covering strong colour changes.
- For the best results, avoid application in temperatures below 8°C and maintain a wet edge by cutting in and rolling each wall immediately to minimise picture framing or patchy finishes.
- For standard application, the paint can be thinned with up to 1 part clean water to 10 parts paint if required.
- For airless spraying, thin with up to 1 part clean water to 5 parts paint and use a 515 low-pressure spray tip at 1300–1700 psi (89–117 bar), or a standard 515 tip at 2000–2400 psi (138–165 bar).
Thining:
Always follow manufacturer's instructions found on the packaging. Find all information on the technical datasheet.
Note: If using more than one tin of the same colour, intermix prior to use to ensure colour consistency. Check tinted product before application to avoid colour differences.