Owatrol Aquanett Oil Remover / Stripper
Overview
Owatrol Aquanett is a powerful, environmentally friendly wood oil remover that restores weathered and UV-darkened exterior timber. Ideal for stripping new, old, or heavily encrusted oils, it also effectively removes mill glaze from new wood in order to boost adhesion of future finishes.
Formulated without solvents or paraffin, Aquanett is fully biodegradable, making it safe for use in sensitive outdoor environments. Its non-drip gel consistency is perfect for vertical surfaces, delivering consistent, run-free application. Fast-acting and easy to use, it’s the perfect prep step before finishing or re-oiling exterior wood.
- Eco-Friendly Formula
- Effective on Stubborn Oils
- Gel consistency clings to prevent mess and maximise coverage
| Area | Exterior |
| Recommended Use | All exterior wood coated with wood oils. |
| Coverage | Up to 4m2 per litre |
| Application Method | Brush, Roller |
| Clean Up | Remove as much product as possible from the equipment before cleaning with water |
Preparation
Remove any loose and flaking finish.
Brush off any physical surface contamination i.e. moss, general dirt etc
Application
- Apply a thick coat of Aquanett over the whole surface to be stripped. For large areas work in zones.
- Allow the product to work (max 5 minutes).
- Scrub the surface with a stiff nylon scrubbing brush while flushing with water
- Thoroughly rinse the surface after stripping with fresh clean water.
- After stripping and rinsing, surfaces must immediately be treated with Net-Trol while still wet to neutralise the surface.
Always follow manufacturer's instructions found on the tin
Aftercare & Storage
Due to Aquanett being biodegradable all you require for clean up is water