Overview

Little Greene Intelligent Exterior Eggshell is a high-performance, water-based paint designed for exterior woodwork and joinery. This self-priming, low sheen finish delivers long-lasting protection with a smooth, elegant look. The opaque coating is ideal for exterior doors, window frames, gates, garden furniture and outbuildings, and can also be used on suitably primed metalwork, combining beauty and durability in one easy-to-apply paint.

Formulated with advanced weather-resistant technology, the microporous, flexible finish protects from UV, resists cracking, flaking, and mould growth while remaining fully washable and virtually odourless. Available in the complete Little Greene colour palette, it provides a sophisticated 15% sheen for a timeless exterior finish.

• Low sheen (15%) weather-resistant finish
• Self-priming on new & bare wood
• Washable, flexible & UV-resistant
• Prevents mould & algae growth
• Ideal for joinery, cladding & primed metal
• Available in all Little Greene colours

Tinted Colour Information

Preparation

Ensure the surface is clean, dry and free from dirt and grease.

Remove all imperfections and repair defects to achieve a smooth, sound surface

New Wood:

• Untreated softwood should be pre-treated with a suitable wood preserver.
• Ensure all smooth-planed timber is thoroughly sanded, clean, dry and free from dust or contaminants.
• Clean rough-sawn timber to remove dust and debris.
• For new or uncoated resinous wood or areas with resinous knots, apply two coats of Aluminium Wood Primer to prevent staining or discolouration before undercoating.
• Apply two coats of Little Greene Intelligent Exterior Eggshell.

Metals:

• Clean new metal (ferrous or non-ferrous) to remove rust.
• Bare or corroded iron/steel should receive 2 coats of Little Greene Intelligent ASP.

Previously Painted Surfaces:

• Remove loose or flaking paint and degrease with a suitable detergent (e.g. sugar soap), then rinse with clean water.
• Sand with medium-grade paper to create a smooth, keyed surface, feathering edges where paint has been removed.
• Make any repairs as required and apply a primer coat of Little Greene Intelligent Exterior Eggshell to exposed surface as appropriate.
• Then apply 2 coats of Little Greene Intelligent Exterior Eggshell.

Do not apply Little Greene Intelligent Exterior Eggshell over waxed, stained or varnished wood without first completely removing the existing coating and thoroughly cleaning and sanding the surface to create a proper key.

Not suitable for use on decking.

Always follow manufacturer's instructions found on the packaging

Application

Always test a small area of the surface to be painted to ensure you are happy with the finished results

• Little Greene Intelligent Exterior Eggshell is ready to use - no thinning required.
• Stir thoroughly before use.
• Apply only when the air and surface temperature are at least 10°C and at least 3°C above the dew point. Avoid painting in temperatures over 25°C. Ensure wood moisture content is below 15% before coating. Do not paint damp or decaying wood, as this can cause flaking, blistering, or cracking. Avoid application if rain or frost is expected during drying.
• Lightly sand between coats to remove dust and imperfections for a smooth, professional finish.

For brush application:

• Use a high-quality synthetic brush suited to the project. Condition new brushes by washing and drying with a lint-free cloth.
• Avoid dipping the brush too deep or overloading with paint.
• Apply in even strokes, maintaining a wet edge.
• Keep final strokes in one direction and avoid re-working once paint starts to dry to prevent lap marks.

For roller application:

• Use a short-nap wool blend sleeve for smooth surfaces.
• Maintain a wet edge and consistent stroke direction. Do not over-roll drying paint to prevent lap marks.

For sprayer application:

• Conventional: Thin up to 20% (v/v) water. Tip: 1.60–2.00 mm (62–78 thou). Air pressure: 0.28–0.41 MPa (40–60 psi).
• Airless: Thin up to 10% (v/v) water. Tip: 0.28–0.54 mm (11–21 thou). Pressure: 12.6–19.6 MPa (1800–2800 psi).

Always follow manufacturer's instructions found on the packaging

Aftercare & Storage

Storage: Keep unused paint in a cool, dry, frost-free place away from sunlight. Replace lids securely after use. When unopened and stored correctly, the product remains stable for at least 2 years.

Cleaning: For light dirt, gently wipe with a damp sponge or lint-free cloth using a lukewarm solution of mild washing-up liquid. Repeat as needed.

Care: Avoid placing heavy objects on painted surfaces for one week.

Repair: Lightly rub down the area, apply suitable primer to any exposed surface, then repaint the whole section with one or two coats as needed. Please note that spot repairs may not match the original finish.