Overview

Little Greene Absolute Matt Emulsion is a premium water-based paint delivering a timeless, low sheen finish with a soft, chalky texture ideal for interior walls and ceilings.

With a sheen level of just 1–2%, this dead matt paint offers a rich, velvety look that enhances depth and character. Formulated with a high pigment level, Absolute Matt is easy to apply and requires fewer coats to achieve a beautiful flat finish.

Made with 40% recycled materials and zero added VOCs, it’s safe, sustainable, and certified child- and pet-friendly. Breathable, virtually odourless and quick-drying, it’s perfect for bedrooms, living rooms and can be used for internal lime or natural plaster walls in heritage interiors.

• Ultra matt finish: 1–2% sheen
• Quick drying, low-odour & easy to apply
• Breathable - excellent choice for heritage projects
• Eco-friendly: 40% recycled ingredients
• Certified Child-Safe
• Available in all Little Greene colours

Tinted Colour Information

Preparation

Ensure the surface is clean, dry and free from dirt and grease.

Remove all imperfections and repair defects to achieve a smooth, sound surface

Previously Painted Surfaces:

• Remove loose or flaking paint and degrease with a suitable detergent (e.g. sugar soap), then rinse with clean water.
• Sand with medium-grade paper to create a smooth, keyed surface, feathering edges where paint has been removed.
• Repair as needed and spot-prime exposed areas with Little Greene Intelligent ASP.

New Plaster Walls:

• Allow skim plaster to dry for at least 4 weeks (6 months for full-depth plaster).
• Apply a primer coat of the paint thinned 5–25% (v/v) with clean water, depending on surface porosity.
• Cut in using the same dilution.
• Finish with two full coats.

Suitable for lime or other natural plasters if fully dry and free from damp.

Existing Plaster Walls:

• Lightly wash to remove dust or laitance.
• Apply a primer coat of the paint thinned 5–25% (v/v) with clean water.
• Finish with at least two full coats.

Note: For major colour changes, undercoating with Little Greene Intelligent ASP is highly recommended.

Suitable for previously painted lime or other natural plasters if dry and compatible with the existing coating.

Always follow manufacturer's instructions found on the packaging

Application

Always test a small area of the surface to be painted to ensure you are happy with the finished results

• Do not apply when ambient temperature is below 8°C.
• Stir thoroughly before use.
• Apply 2 coats by brush, roller or sprayer.
• Note: For large flat areas, a roller application is recommended.

For brush application:

• Use a high-quality synthetic brush suited to the project. Condition new brushes by washing and drying with a lint-free cloth.
• Avoid dipping the brush too deep or overloading with paint.
• Apply in even strokes, maintaining a wet edge.
• Keep final strokes in one direction and avoid re-working once paint starts to dry to prevent lap marks.
• For intricate work or in warm/dry conditions, extend open time by adding 10–15% (v/v) clean water.

For roller application:

• Use a short-nap wool blend sleeve for smooth surfaces; increase nap for textured areas.
• Maintain a wet edge and consistent stroke direction. Do not over-roll drying paint to prevent lap marks.
• Add 10–15% (v/v) clean water in hot or fast-drying conditions.

For sprayer application:

• Conventional: Thin up to 40% (v/v) water. Tip: 1.60–2.00 mm (62–78 thou). Air pressure: 0.28–0.41 MPa (40–60 psi).
• Airless: Thin up to 20% (v/v) water. Tip: 0.28–0.54 mm (11–21 thou). Pressure: 12.6–19.6 MPa (1800–2800 psi).

Always follow manufacturer's instructions found on the packaging

Aftercare & Storage

Storage: Keep unused paint in a cool, dry, frost-free place away from sunlight. Replace lids securely after use. When unopened and stored correctly, the product remains stable for at least 2 years.

Cleaning: For light dirt, gently wipe with a damp sponge or lint-free cloth using a lukewarm solution of mild washing-up liquid. Repeat as needed. Remove DIY dust by vacuuming, using a soft brush attachment to avoid marking nearby surfaces.

Care: Avoid placing heavy objects on painted surfaces for one week. Consider applying suitable beeswax polish to high-use areas such as bookshelves to reduce long-term marking.